May I ask why you did it like Bill in the first place?
Printable View
Ah, thanks.
I was wondering why he would want to up the voltage with a hot coil then choke it with a resistor (on a point-less system).
FWIW: The Blaster 2 sheet says a resistor is not required (2nd column, just before "Removal" instructions).....
That was the first thing I noticed. In fact, there are quite a few things wrong with the video. However, the finished product should look slightly better, and also be funnier. :)
Someone pointed out to me that I should have writ "OZZY" on my left hand's fingers as he evidently did that when he was a teenager. So add that to the list. :lol:
Farrar
Now that is a loaded question if I ever saw one LOL!!!
Seriously, points or electronic, it's just a switch, a trigger for when to fire the coil, nothing else. The gap recommended by the manufacturer(s) is determined after considerable testing of the spark's curve and resulting burn for a given engine.
(This has been pointed out several times, by several people, in several threads to no avail -- no offense or implication directed toward you whatsoever! -- A stinking can of worms that needs to stay shut at this point IMO ;-)
If it was points based it would have points, no?
I don't know what that looks like. Although the book I have at home on automotive tune-up and maintenance mentions "points open" and "points closed" for certain tests, it does not contain illustrations. Ignition is the one system on the car I have not yet studied in detail, and I am a slow learner.
Farrar
It's all just two ways of doing the same thing. Just look at the pictures in the link below ;-)
(If you care to read it, notice the purpose of the capacitor (condenser) is for more than radio noise suppression, another myth floating around...)
http://www.familycar.com/Classroom/ignition.htm
A second thought on the resistor- When replacing a point based system with a "breaker-less/electronic" upgrade, every one I have seen has a full 12V feeding it.