Ah, thanks.
I was wondering why he would want to up the voltage with a hot coil then choke it with a resistor (on a point-less system).
FWIW: The Blaster 2 sheet says a resistor is not required (2nd column, just before "Removal" instructions).....
Location: Atlanta OTP GA
Posts: 7,085
My VIN: 2743
Club(s): (SEDOC) (DCH) (DCUK) (DOC-UK)
Dermot
VIN 2743, B/A, Frame 2227, engine 2320
I don't always drive cars, but when I do, I prefer DeLoreans
http://www.will-to-live.org
No-one is to stone anyone, even, and I want to make this absolutely clear, even if they do say "carburetor"
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
That was the first thing I noticed. In fact, there are quite a few things wrong with the video. However, the finished product should look slightly better, and also be funnier.
Someone pointed out to me that I should have writ "OZZY" on my left hand's fingers as he evidently did that when he was a teenager. So add that to the list.
Farrar
3.0L, automatic, carbureted
Now that is a loaded question if I ever saw one LOL!!!
Seriously, points or electronic, it's just a switch, a trigger for when to fire the coil, nothing else. The gap recommended by the manufacturer(s) is determined after considerable testing of the spark's curve and resulting burn for a given engine.
(This has been pointed out several times, by several people, in several threads to no avail -- no offense or implication directed toward you whatsoever! -- A stinking can of worms that needs to stay shut at this point IMO ;-)
If it was points based it would have points, no?
Location: Baton Rouge, Louisiana
Posts: 3,047
My VIN: 16510 and carbureted
Club(s): (GCD) (SEDOC) (DCUK)
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
I don't know what that looks like. Although the book I have at home on automotive tune-up and maintenance mentions "points open" and "points closed" for certain tests, it does not contain illustrations. Ignition is the one system on the car I have not yet studied in detail, and I am a slow learner.
Farrar
3.0L, automatic, carbureted
It's all just two ways of doing the same thing. Just look at the pictures in the link below ;-)
(If you care to read it, notice the purpose of the capacitor (condenser) is for more than radio noise suppression, another myth floating around...)
http://www.familycar.com/Classroom/ignition.htm
A second thought on the resistor- When replacing a point based system with a "breaker-less/electronic" upgrade, every one I have seen has a full 12V feeding it.