HA! No Im done with you not addressing your contradictory statement, not surprised though. Not sure I can take your inability to address it much more. :frantic:
My area of expertise is 1970's domestic automobiles, spilling into the early-mid 1980's. I have a wealth of practical experience in that area, and am fully qualified to answer any question you may have related to it.
I am very inexperienced with anything built after the mid 1980's. Someone with much more experience in that area would be better qualified to answer questions related to it.
It's no different than a dentist forwarding cardiovascular questions to a doctor who specializes in that area, and vice versa.
Bill Robertson
#5939
YEAH, Bill should like my new signature.
Do Ron and Sean (our ostensibly neutral moderator) have serious questions about carbureting a DeLorean, or did they just come in here to hurl invectives around?
Just so there's no misunderstanding: I specialize in adapting 1970's spec Mustang carburetors (2.8 liter V6, Motorcraft 2100/2150 with appropriate size venturis and jets) to stock DeLorean engines. Some owners have asked me to make adapter plates to mount said carburetors to Peugeot 604 intake manifolds they already have on hand (I only have one Peugeot manifold here, and it belongs to someone else -- I'm using it for testing purposes). Other owners have asked me to make complete intake manifolds from scratch.
Most owners also ask me to provide the carburetor itself, but not all do so.
Since every installation is test driven on my own car before I sign off on it, if I provide the carburetor as well as the manifold or adapter, it will already be set up for immediate use.
I do not use any other brand or size (ex: Autolite 4100) of carburetor for DeLorean installation. I may be willing to make an adapter or manifold for a different carburetor, but the owner him or herself will need to source and install the actual carb in that instance.
If an owner wants, I can source all the parts necessary for a complete conversion, including fuel pump and tank baffle, fuel filter and bracket, hoses and clamps, throttle cable adapter and bracket, even a custom air filter lid with factory size stickers.
After a summer hiatus I am again making conversions for owners in Massachusetts (604 manifold), Michigan (604 manifold) and Florida (complete manifold, he already has a suitable Motorcraft carb). If anyone else wants a conversion, this is a perfect time to request it since I am currently concentrating on making these over my many other projects.
Bill Robertson
#5939
HA! Another great rebuttal to a question you cant answer! Just because Im a mod doesn't me you cant ignore my questions any more than if I was Martin or Ron. Its amazing the lengths you'll take to not respond to folks with questions that aren't kissing your butt.
Just so I understand, its ok for you to go into other threads and start jabbing about better fuel options or ignition options or jabs about how quickly you can access a slave cylinder, or how you can easily read casting numbers because you have simpler exhaust or how ford engineering trumps anything and everything, even when the original topic had nothing to do with any of those things, yet when sean makes a jab its suddenly unacceptable?
To be clear, I aint jabbing but was confused by his inconsistency when he stated
To me this is counterintuitive when you consider Bills history of products he markets. I simpley asked why then is my 2010 car not carbed when he states that he prefers "Optimal preformance, just like nearly every other automobile manufacturer in 1981 (and since, to this very day)" So I dont think the logic is to hard to follow:
Bill prefers "optimal performance"
Bill prefers Carbs
Bill prefers optimal performance just like auto manufactures do to this very day
Auto manufactures of this very day should prefer carbs for their optimal performance. Right?
It seems Bill views me asking him a question as Admin abuse and a true spit in his face act so he choose to not answer my questions, much like most any Martin or Ron asks, so really I feel in good company over all!
I was not present at any meetings where manufacturers discussed fuel delivery decisions, so anything I could say would be conjecture at best.
The historical record shows that both carburetion and Bosch mechanical fuel injection were eventually phased out, and neither is used in new consumer car production now (NASCAR still uses carburetors in its off road applications), so whatever manufacturers' reasoning was likely was similar in both instances.
The historical record does show that carburetion continued to be used in new consumer car production for many years after Bosch mechanical fuel injection was discontinued, whatever conclusion can be drawn from that.
The historical record also shows that Bosch mechanical fuel injection was never used as widely as carburetion (not a single American or Japanese manufacturer ever used it), whatever conclusion can be drawn from that.
Regarding the Motorcraft 2100 series in particular: last model year for its use was 1991 (V8 Jeeps). That carburetor had a 35 year production run, from its 1957 introduction as the Autolite 2100 (the company was not owned by Ford at that time -- Ford did not buy Autolite until 1961), through the moderate 1972 Motorcraft redesign/rebadging, to the late 1980's addition of electronic throttle feedback and active idle control. It was an extremely widely used carburetor (Ford used it worldwide; AMC, Chrysler, Packard, and Studebaker used it stateside). Millions of original castings are still in existence. New parts for repair or rebuild are inexpensive and readily obtainable. Any owner considering a Motorcraft 2100/2150 for his or her DeLorean certainly need not fear owning a rare or unusual carburetor.
Bill Robertson
#5939
Byrne Heninger also uses Motorcraft 2100's for his carb conversions.
One might think that Sean's antipathy towards carburetion would have subsided somewhat after Byrne started doing conversions, especially given all Byrne has done for Sean over the years. That Sean is even more aggressively antagonistic now is mystifying to me at least.
Bill Robertson
#5939
One might think that my repeated statements that I think carbing is fine for folks who want it would be enough for you to get it through that thick martyr head of yours but it seems you ain't happy unless you're feeling Admin abused :confused:. You sure do think a lot of yourself if you think I really give a shit who's car you convert. I've said it before(multiple times) and I'll say it again even though it's like talking to a wall with you:
I like Bill the person
I think DeLoreans that are carbed are fine with me
Internet Bill can be a real pain in the ass for some reason and not as fun to be around as Bill in person.
I don't think folks with a minor fuel problem should be told they need a carb kit to make all their fuel problems go away.
My view has NEVER changed but your bipolar internet persona has interpreted my view as something different from day to day.
I'm curious now how you're gonna twist this, probably just ignore it and talk about how you've been threatened to be exiled and burned for your carb believes or something like that.:bang:
Since you know even less about this than you think, future posts by you on the topic will be removed. Repeat offend and moderation will be in order.
My user ID only gets revoked when I PM you to fuck yourself (last time at least).
I have been *TEMPORARILY* banned three times over the years -- does any other user share that distinction?
Bill Robertson
#5939
Where did my temporarily suspended 3 times post go? It *IS* a historical fact (on the old site Sean publicly stated that he could count on one hand the number of users he has suspended more than once -- it was in the old carburetion thread, right about the time Steve Rice was either threatened to be suspended or actually suspended, can't remember which).
For the record, I have only been banned for talking back to the moderator, not for anything mentioned above.
Bill Robertson
#5939
I just PM'd my eMail address to the owners I am working with (can you really read those BTW?), so if you want to suspend me for a fourth time, go ahead....
Bill Robertson
#5939
Dang man, right on queue. This is why I wanted to call you or you call me, something is worse in your eyes than it is mine. Anyway, call if you like I ain't mad except for that thing you pmd me about but otherwise in my eyes you and I are cool.
Also, Mike and I have NO access to PMs other than our own.
I'll be damned -- my password still works. This must be the new & improved kinder and gentler Sean in action.
You ignorant fool. If you had been paying even a modicum of attention you would know that Dan is going to convert to carburetion. Those of us with carburetors do like to banter among ourselves about how much easier our engine access is than K-Jetters. If you don't like it, stop eavesdropping on our conversations.
Bill Robertson
#5939
This is the thread "Soundkillr" (name please...) was referencing, Post #5 in particular: http://dmctalk.org/showthread.php?14...on-Distributor
The questions Dan has been asking in the HEI thread make it seem that he is seriously considering whether or not to modify his ignition along with fuel delivery.
Bill Robertson
#5939
???#5 is not your post???
If you meant #6, the only thing he mentioned that you also said in that post is about reading serial casting numbers, but nothing about exhaust being simpler to do because of exhaust like he said. And even that was on topic/subject. Oddly enough, all your posts, jabs or not, are on topic/subject in that thread.
Where are the other 5-6 things (not related to the topic) he was referring to?
I really don't see how, Bill.
Maybe you need to rethink this?
I don't need to rethink a damn thing.
This thread was started by Steve, but I'm pretty sure he had me in mind (if I'm wrong, Steve has only to say the word and I will stay out of it).
The HEI and Volvo Distributor threads are mine -- I can say anything I want in them.
Bill Robertson
#5939
Bill your the fool who is so one sided about everything! You offer some good advice in some threads but it is almost always followed by a snide remark or childish look what I can make better comment. If you are called out on it, then suddenly you lable that as a purist or someone who is out to get you.i dont give a damn whos post it was or who is converting what, othere people can read the same damn thread and get just as sick of it, I was mearly pointing out when its done to you, dare I say, you cant handle it. Just like you post bs in others threads, they or even I have the right to do the same. You really make yourself look stupid when you come off swearing about everything when you get angry. Relax you will live longer. Sound familiar? Name by the way is Ben Davis, want my address as well?
And there wasnt a quote Ron. Bill is just grasping at this point. "I am a fool who isnt paying attention and eavesdropping on conversations." This is what I mean when I say he cant answer call outs. This is a open forum, I can read and post what I want, and bill proves this practice every day. If bill had shown a modicum of attention he would note several other examples on my quote, not just one about casting numbers. By the way that was just a small list of examples. I could have filled the page.
What do you want to call me out on:
- That my DeLorean is faster than a stock DeLorean? I stand guilty as charged.
- That my DeLorean is more reliable than a stock DeLorean? I stand guilty as charged.
- That my DeLorean is easier to maintain than a stock DeLorean? I stand guilty as charged.
- That my DeLorean has fewer dollars invested in it than most DeLoreans? I stand guilty as charged.
- That I drive my car more than most DeLorean owners do, no matter the weather (even through actual tornadoes)? I stand guilty as charged.
- That I am more willing to reinvent whatever Lotus designed wrong than most DeLorean owners are? I stand guilty as charged.
- That I have never accepted a single penny, beyond materials reimbursement (not labor), for assisting other DeLorean owners with their cars? I stand guilty as charged.
- That I am willing to travel, free of charge, to other DeLorean owners' houses to help them work on their cars in their own driveways? I stand guilty as charged.
Bill Robertson
#5939
Yea bill no big deal, those are all your opinions except the last ones. Im not going to enter a performance debate with you right now, but am willing to bet a kjet car with exhaust mods similar to yours will equal you in power. As it has been pointed out to you before, get a dyno and some balanced cars (fuel delivery aside) and dyno them. Or line them up on a track. I would be happy to.volunteer my car but that wouldnt be fair...
As far as calling you out, you have conveniently ignored the point again. You constantly jab at people, whatever the reason, and my initial post was simply bringing light to it. You still have not answered the question. Why can sean not bring up a question or a point, and you can?
YEAH, if Sean didn't suck so much he would start deleting posts with stupid personal attacks so we can get back to talking about carbs and the stunning waitress at iHop.
http://dmctalk.org/showthread.php?95...ll=1#post17812
As stated, I can not speak for any manufacturer -- if you want to know what they were/are thinking, I suggest asking them directly.
I can speak to the historical record, which shows carburetion in wide scale use before and after K-Jet use, whatever conclusions you want to draw from that.
There is no agreed upon answer on the internet for what the last production car with a carburetor was, but all the various answers put it 1994-1995. The last production vehicles with a Motorcraft 2100 carburetor in particular (the carburetor I use) were 1991 V8 Jeeps.
Bill Robertson
#5939
YEAH, I forgot to mention my generator has a carburetor on it. We are having a storm this weekend and I'm ready in case the power goes out.
I put fresh gas in it, sprayed a little carb cleaner in the air intake, and the thing started up first try. I love carbs.
I'm up to page 15 already and not seeing it: http://dmctalk.org/search.php?searchid=54141
Page 4: I do make a jab at Justin, a friend I have known for many years, about buying a Ford. It's kind of like the jabs you made at Sean in the Bad Moderator thread, except that I only did it once.
I do make multiple comments in Farrar's blog thread, mostly about his neverending fuel pump problem (for example, on Page 5 I threaten to drive to New Orleans and install the damn thing for him). I know Farrar even better than I know Justin, and Farrar's neverending pump problem has gone on for ever....
The Ignition Coil Questions thread started veering off course, so I voluntarily split it to an HEI thread myself.
This thread and the HEI thread are of course full of people telling other people that they are full of shit (mostly Ron and Martin saying that to Steve and I, and vice versa). If you don't like it, don't read them. The post history does show that we keep those arguments in these two threads.
Anyway, as stated, I am more than halfway through rereading every single post I have ever made on this forum, and I just can't find actual instances of what you are intimating. Are you sure you haven't confused me with someone else?
Bill Robertson
#5939
YEAH, I got tired of reading Ron's opinion so I made a final post with what I experienced saying I wouldn't talk about it with Ron anymore. People can decide what they want to believe based on what happened to me or based on Ron's theories. The reality is I am not going to change Ron's mind and he isn't going to change mine. To think otherwise, after pages of debate would be foolish.
Anyway, we agreed to disagree and left it at that. On another thread he gave me some good advise and I'm thankful. He's probably a great guy and I hope to meet him and several others at DCS.
A debate is just a debate and nothing more. Its no reason to make enemies or get feelings hurt. I hope no one has any harsh feelings towards me or anyone else because of the debates that go on.
At work we have debates all the time, jokingly call each other morons, and at the end of the day we are all still friends. What sucks about the forums is we don't have the same type of interaction as in person and people seem to get bent out of shape when someone disagrees with them.
Relax guys. We are just here to talk about a crappy little car that all of us love, despite our differences.
Im not confusing you with anyone. In the past there have been posts that are more on the tone of my car is better because x or look what I can do because of x. Or engineering sux because of x and I made it better with y. Its your tone and attitude. Call outs aside, most people dont take such a definsive approach as you. If I had a dollar for every time you have said deloreans suck and ford is better I could buy all of sedoc a meal at outback. I wont cite example with quotes, to much work. As far as ignoring your comments, I do it all the time, but in this case had an honest question as this seems to be a constant debate tactic. But I was a fool for my questioning the all knowing bill. :)
For the umpteenth time, Sean's question was answered: http://dmctalk.org/showthread.php?95...ll=1#post17812.
Bill Robertson
#5939
And for the umpteenth time, not before you knocked on sean for whatever reason. That reason is why I asked why he is not free to ask questions or counterpoint without an attack. Then obviously you called me out for an acurate observation. Part of me wants to ask: what about deloreans do you like? Perhaps I should start another thread. I have a feeling it would be a short one....
Go back and reread the posts, you ignorant fool. Sean's and my disagreement came *AFTER* that post.
Moreover, our disagreement occurred via PM. The only thing that was posted publicly was the fallout.
You can ask any question you want (be forewarned that a moderator may delete it). I answer all questions I am qualified to answer. I may ask you to clarify what you are looking for first, just as I asked Sean to clarify his question immediately prior to Post #331.
Bill Robertson
#5939
Bill I can level myself to your debate tactics. Here goes. Your and idiot. I dont care what order it took place, you just had to bitch about being called out, yet you do it to others all the time. You are a real piece of work. Wanna take it to pm, you know the address, your bob and weave antics are not gonna work. Just keep name calling and perhaps you can fool yourself into thinking you are right.
Spell check: You're an idiot.
You explicitly stated in Post #357 that I only answered Sean's question after "knocking" on him:
That is factually incorrect. Post #331, the answer in question, occurred *BEFORE* any "knocking." You certainly cared in Post #357 what order events happened in -- your entire argument was premised upon it!
Moreover, if anyone on this forum deserves a little knocking, it is our supposedly neutral moderator. Sean is an asshole (ass whole?) -- period.
(Somebody had to say it...).
You and Sean apparently enjoy a close relationship, based on the inside jokes traded on this forum. That's fine and good, but don't come all unhinged if someone gives back to Sean just a small portion of the shit he dishes out daily. Sean is a big boy, fully capable of fending for himself. Trust me -- I've been fended three times already.
Bill Robertson
#5939