Location: Sacramento-ish
Posts: 4,408
My VIN: 02100
Club(s): (NCDMC) (DCUK)
Jon
1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
restoration log, March 2011 to present
full and detailed photo restoration log
Location: Omaha, NE
Posts: 1,755
My VIN: loading, please wait...
happy birthday, Farrar!![]()
Obtain-O-Meter: 128%
as of 2016/08/04
0%|====|====|====|====|====50%====|====|====|====|====|100%
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
28.Jan.2012
Thanks, all, for the birthday wishes. I hope 33 is a good year for me. (And I hope 31 is a good year for #2613!)
This morning's projects, if my girlfriend will allow them, are to finish the trunk lighting modification I started the other day and finishing wiring up the blinking security light. Then I have to go to a parade... which will pretty much kill the rest of my day.
Trunk lighting modification is complete and verified functional -- huzzah! I am now waiting for the security light's adhesive to set and will install it later today if there's enough ambient light left after this afternoon's activities. Oh, and I will get pictures/video of new trunk lighting for y'all to see, too.
Fingers crossed.....
Two small SMD panels. Much better than my first attempt at improving the trunk lighting.
SANY0011.jpg
Photo was taken with no flash.
3.0L, automatic, carbureted
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
Do you mean "turned off" or "off the car"?
Technically I cannot take a photo of them off the car since I mounted them with a bunch of black weatherstrip adhesive (I coated the back of each PCB liberally not only to adhere but also to protect the circuitry from moisture). However, here is a picture of the unit from SuperBrightLEDs.com (link is to product page):
Superbright does specify that some SMD panels cannot have their plugs removed and still work; I bought ones which can have their plugs removed, for obvious reasons.
If you need a photo of the units in situ with the power switched off, I can get a daylight photo for you tomorrow.
Thanks for the compliment!![]()
3.0L, automatic, carbureted
Location: Omaha, NE
Posts: 1,755
My VIN: loading, please wait...
apologies for the lack of clarity in my previous post; i was curious as to how you mounted the setup on the bonnet lid.
i can wait for a daylight picture.![]()
Obtain-O-Meter: 128%
as of 2016/08/04
0%|====|====|====|====|====50%====|====|====|====|====|100%
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
Here's a picture taken in daylight with the power off.
oneoff.jpg
Strangely, my car behaved quite well to and from today's tech session (about 30 miles each way). Then when I got home, I noticed the same bad idle that I had noticed before. When I went outside just a few minutes ago to move the car, it absolutely refused to idle -- unless it was on the fast-idle cam turning at 1500 RPM, it wouldn't move.
Do I have a vacuum leak to track down? Is one of the symptoms of a vacuum leak running better when hot and running like crap when cold? Because that is what I experienced today -- hot engine, decent idle; cool engine, crappy idle; cold engine, no idle. I will find out Saturday, I guess.
Farrar
3.0L, automatic, carbureted
Location: Reedsburg, WI
Posts: 4,042
My VIN: 5180
Club(s): (DMWC) (DCUK)
Looks like one SMD board would fit the Original opening pretty closely. I might try something like that and create a finishing bezel for it.
DENNIS
VIN 5180, Frame 3652, STAGE II, EPS, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.
Location: Omaha, NE
Posts: 1,755
My VIN: loading, please wait...
Obtain-O-Meter: 128%
as of 2016/08/04
0%|====|====|====|====|====50%====|====|====|====|====|100%