FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 67 of 111 FirstFirst ... 17 57 65 66 67 68 69 77 ... LastLast
Results 661 to 670 of 1102

Thread: Farrar's car blog

  1. #661
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by Farrar View Post
    I think I have heard the same thing -- "possible but more difficult." I thought about removing the dashboard and adding some sound dampening material to the backside of it, but I am not sure that is feasible. The good news is Steve has removed and installed a dashboard before, so I can draw on his experience in this area. My greatest concern is that, in the process of removing or reinstalling a 31-year-old part, I will damage or destroy it. This is what happened when I took out the kneepads -- when I tried to put them back in, the studs came out. And it's happened in other instances as well. So in the long run, instead of "leaving well-enough alone," I might as well make some changes that I consider to be improvements. It is, after all, my car to do with as I please, right?
    Definitely. Plus it's your birthday for at least a few more minutes.
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  2. #662
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    happy birthday, Farrar!
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  3. #663
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    28.Jan.2012

    Thanks, all, for the birthday wishes. I hope 33 is a good year for me. (And I hope 31 is a good year for #2613!)

    This morning's projects, if my girlfriend will allow them, are to finish the trunk lighting modification I started the other day and finishing wiring up the blinking security light. Then I have to go to a parade... which will pretty much kill the rest of my day.

    Trunk lighting modification is complete and verified functional -- huzzah! I am now waiting for the security light's adhesive to set and will install it later today if there's enough ambient light left after this afternoon's activities. Oh, and I will get pictures/video of new trunk lighting for y'all to see, too.

    Fingers crossed.....

    Two small SMD panels. Much better than my first attempt at improving the trunk lighting.



    SANY0011.jpg
    Photo was taken with no flash.
    3.0L, automatic, carbureted

  4. #664
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    Quote Originally Posted by Farrar View Post
    Photo was taken with no flash.
    badass.

    could you post a photo of the mounted SMD panels while they are off? id like to see your setup.
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  5. #665
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by dvonk View Post
    could you post a photo of the mounted SMD panels while they are off?
    Do you mean "turned off" or "off the car"?

    Technically I cannot take a photo of them off the car since I mounted them with a bunch of black weatherstrip adhesive (I coated the back of each PCB liberally not only to adhere but also to protect the circuitry from moisture). However, here is a picture of the unit from SuperBrightLEDs.com (link is to product page):



    Superbright does specify that some SMD panels cannot have their plugs removed and still work; I bought ones which can have their plugs removed, for obvious reasons.

    If you need a photo of the units in situ with the power switched off, I can get a daylight photo for you tomorrow.

    Thanks for the compliment!
    3.0L, automatic, carbureted

  6. #666
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    apologies for the lack of clarity in my previous post; i was curious as to how you mounted the setup on the bonnet lid.

    i can wait for a daylight picture.
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  7. #667
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Here's a picture taken in daylight with the power off.

    oneoff.jpg

    Strangely, my car behaved quite well to and from today's tech session (about 30 miles each way). Then when I got home, I noticed the same bad idle that I had noticed before. When I went outside just a few minutes ago to move the car, it absolutely refused to idle -- unless it was on the fast-idle cam turning at 1500 RPM, it wouldn't move.

    Do I have a vacuum leak to track down? Is one of the symptoms of a vacuum leak running better when hot and running like crap when cold? Because that is what I experienced today -- hot engine, decent idle; cool engine, crappy idle; cold engine, no idle. I will find out Saturday, I guess.

    Farrar
    3.0L, automatic, carbureted

  8. #668
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,042

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Looks like one SMD board would fit the Original opening pretty closely. I might try something like that and create a finishing bezel for it.
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, EPS​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  9. #669
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    Quote Originally Posted by Farrar View Post
    Here's a picture taken in daylight with the power off.
    thanks for the daylight picture. all those SMDs really throw out the light.

    Quote Originally Posted by DMC5180 View Post
    Looks like one SMD board would fit the Original opening pretty closely. I might try something like that and create a finishing bezel for it.
    sounds like a neat project; id definitely like to see the finished product.
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  10. #670
    Not dead yet, also Admin. sean's Avatar
    Join Date:  May 2011

    Location:  Dahlonega GA

    Posts:    2,462

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    Do I have a vacuum leak to track down? Is one of the symptoms of a vacuum leak running better when hot and running like crap when cold? Because that is what I experienced today -- hot engine, decent idle; cool engine, crappy idle; cold engine, no idle. I will find out Saturday, I guess.
    Time to call the CarbHotline
    eBay selling at it's best I can tell you stock Delorians and quite a bit of slugs so the Turbo is a super nice up-grade.
    K-Jet: Causing electrical issues since November 5th 1955

Page 67 of 111 FirstFirst ... 17 57 65 66 67 68 69 77 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •