Ask Bill about carbing a DeLorean and other K-Jet/Carb tangets

[Farrar]

Take out these two components:

FuelPumpComponents2.JPG

Their only purpose is to position the pickup screen lower in the tank.

Bill Robertson
#5939

Once again, I am cursed by being an early adopter.

My pipe cap is not tapped for 1/4" NPT.

There is no bushing in the pipe cap, just the close nipple, which will not come out. I've tried vise-grips and a hammer, and it won't move. Now I have a reducing coupling stuck in the bottom of the pump carrier, and that close nipple stuck in the bottom of the pipe cap.

Grr.

Farrar