FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 42

Thread: Frustrating Fuel Problem!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #28
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,635

    My VIN:    03572

    Quote Originally Posted by dn010 View Post
    Also - Bill, you used 8 gauge, Dave used 10 gauge... this may be a stupid question but is there any benefit in using the one over the other in our setting? I am using 8 gauge, but I am just curious at this point... And maybe the answer will help steer future readers while doing this upgrade.
    You need to consider what voltage drop you want to tolerate.

    example:
    If you were not using the frame and only a buss wire ground, Your current from the front end is say 50 amps (headlights and fans). Now find the resistance of your buss wire using this table.

    http://www.interfacebus.com/Copper_Wire_AWG_SIze.html

    The voltage drop is equal to the resistance in ohms times the current in amps.

    So a ten foot length of AWG 8 would drop 0.32025 volts.
    Ten foot of AWG 10 would drop 0.509 volts.

    The frame of the car has a lot of "circular mils" area to conduct current. So it's pretty good even though it's made of steel. Would be interesting to test it's resistance from the battery connection to the front of the car.
    Last edited by Bitsyncmaster; 08-23-2011 at 02:44 PM.
    Dave M vin 03572
    http://dm-eng.weebly.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •