You need to consider what voltage drop you want to tolerate.
example:
If you were not using the frame and only a buss wire ground, Your current from the front end is say 50 amps (headlights and fans). Now find the resistance of your buss wire using this table.
http://www.interfacebus.com/Copper_Wire_AWG_SIze.html
The voltage drop is equal to the resistance in ohms times the current in amps.
So a ten foot length of AWG 8 would drop 0.32025 volts.
Ten foot of AWG 10 would drop 0.509 volts.
The frame of the car has a lot of "circular mils" area to conduct current. So it's pretty good even though it's made of steel. Would be interesting to test it's resistance from the battery connection to the front of the car.



Reply With Quote
