Quote Originally Posted by Timebender View Post
Do you know what size the round gauges are? I got one off eBay - a Phaostron that's 2.5 inches across the bezel, but obviously too small as the holes in the faceplate are 7cm that I got from Bruce, and that's the size in the sketch on here as well.

There's one more on eBay, but it's only 2 inches in diameter.


Greg
The diameter of the outer black ring of the gauge face is roughly 3.5" diameter, and the hole size in the panel should be 2.875". You should be looking for a gauges with a 631-XXXX part number. The ones from Apex are 631-19110