Quote Originally Posted by Farrar View Post
If there's no need to remove the cover for the hole where the old fuel pump used to be, one could simply RTV a piece of plastic to it.

Farrar
I think one can assume that one would need to get into the tank again. For example the pump may fail (will over long enough usage) and need replacement.

So the issue is finding or making a tank pump hole cover. At this point I'm pondering a fiberglass cover molded to the original top portion of the boot to seal the tank. I'm not sure how well the two would bond or how well they would bond using Polyurethane or similar. It would be attached to the tank with a hose clamp like now and thus could be removed to be serviced. BUT I still hope for a better idea.

Nick