FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Guy with a DeLorean
I used POR15 gray on all my repairs above, then covered with primer for better adhesion for the rustoleum to stick...I must have missed that photo in the POR15 painted stage. I've attached it below.
As you can see the POR gray is quite a bit darker than the stock frame color, but that actually helps make it obvious which areas you've painted.
To clarify, the layers of paint I used were
POR15 Gray (2-3 coats)
POR Self Etching Primer (2 coats)
Rustoleum Smoke Gray (2 coats)
Last edited by Mark D; 10-10-2012 at 10:18 AM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules