FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-

Originally Posted by
content22207
What kind of failures are you experiencing? My epoxy killed pump just sat there like a bump on a log (didn't do anything). I lost one pump to what appeared to be bearing failure (jumped around so much it was difficult to hold in my hand). It is possible my third pump did not die (the car bogged down just as Louie and I were passing an off ramp, so we zipped off the interstate, into the gas station at the top, and threw the spare into the tank -- it could have been a gust of headwind).
The pump currently in my tank got me Alabama to New Orleans, then went to/from Lexington, Pennsylvania, and DC twice, but I won't hesitate for a second to throw my spare in there if necessary.
Bill Robertson
#5939
I'm going to respond to this in the carb thread for sake of constancy.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules