FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member

Originally Posted by
mluder
Just out of curiosity, because your car is under rehab, how much is still in/on the door? In other words are the interior panels on? What about the glass and latch/lock mechanisms?
It wouldn't make any sense to test a gas strut on a door that is not complete. It would make even less sense to make a video showing the performance of strut with anything else than normal operating condition.
I'm working on the frame and I have not touched the doors. The only interior components that are missing are the seats, floor carpets and rear shelf carpeting. All that carpeting and foam stinks so bad that I had to remove it from the car. It's a very unusual smell of... hmm... I don't know really. Disintegrating foam maybe. It's not an "organic" smell and not old car dusty smell. It's technical, synthetic and just nasty.
The door is 100% complete with all internals, glass, locks and everything else. I did not remove any parts from the door. The mirrors are still there, the pull handles and even the pull straps. You can hear the latches close in my video. They work just fine but the striker pins need to be adjusted slightly.
-
Senior Member

Originally Posted by
Tomcio
It wouldn't make any sense to test a gas strut on a door that is not complete. It would make even less sense to make a video showing the performance of strut with anything else than normal operating condition.
I meant no offense... Some people may not realize how much weight these parts - even something as simple as just the upper door card - can add to the delicate balance that results in either a door that opens fully or sags.
Cheers
Steven
Cheers
Steven Maguire
#4456

IT'S A TRAP!!!!!
-
Senior Member

Originally Posted by
mluder
I meant no offense... Some people may not realize how much weight these parts - even something as simple as just the upper door card - can add to the delicate balance that results in either a door that opens fully or sags.
Non taken! Don't worry. I'm sorry if I made it look otherwise.
I was just stating the obvious that it wouldn't make any sense
Really!
In one of my previous posts I've said that I have more than one car that I can test the struts on. Everything from poorly adjusted door to pretty much completely disassembled door. My main test was done on my car, the 6149 where I know the door works good and is stock with everything on it. But, the dampening is so effective that even the door with all interior components missing doesn't bounce at the top. It slows down and just stops at the top.
BTW, the order went in on Tuesday and I'm currently waiting for an official bill from the factory. Once I receive that I will make the payment.
The lead time at the factory is 3-4 weeks. I'm sorry to say this but I don't think anyone will actually receive the new struts before the DCS.
-
Senior Member
Hello everyone,
I've visited my laser engraver yesterday and just for fun slipped the stainless gas spring under the "gun" to see what it would look like.
Here's the result:
2014-05-07 20.00.53.jpg
2014-05-07 20.01.22.jpg
In my opinion it looks very nice and so if anyone is still obsessed with the logo I will be able to have it engraved on the struts. For black struts the laser engraving has a different color. It will be gray with a slight brownish tint.
Logo or no-logo will be an option just like in the case of the mirrors.
Thanks
-
Senior Member
Wow, it looks awesome with the DMC logo
-
Senior Member
-
Oops I just drooled on myself...
-
Senior Member
Neat idea with the engraving, you are like Ed Uding, logo crazy
-
Senior Member
Put me down for a set of the stainless with the logo.
-
Senior Member
Update time!
I've got some news for everyone waiting for the new door struts. Actually, the manufacturer refers to them as "gas springs" and they correct me every time I call them something else
Details...
I have received an ETA and according to them the shipment should arrive first week of June. I will then need a couple of days for packaging and after that they'll be ready to go out. I already got a whole bunch of cardboard tubes and some bubble wrap. I want to get them on their way ASAP.
There's only one problem guys... The manufacturer is letting me have less units that I have ordered. They are saying that the manufacturing costs have changed and they want to renegotiate the deal now... again.
I will not have enough units for all that were interested. I'm talking with them about this price change but it seems that the final price will be higher. All those that have emailed me will receive them at the current price of $35 each ($70 a set of two) but all orders from now on will have a different price.
Once I'm ready to start taking payments I will email those who emailed me first. The remaining orders will have to wait for the second batch.
The stainless gas springs will be available a bit later. We are still working on getting the correct brushed finish. At this time I'm waiting for my first set to see the finish in person on an actual product. The deal is the same here as with the black ones. All who emailed me will receive their sets at the current price. All future orders will have a new price.
Will post an update when new information becomes available.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules