FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 46 of 111 FirstFirst ... 36 44 45 46 47 48 56 96 ... LastLast
Results 451 to 460 of 1102

Thread: Farrar's car blog

  1. #451
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by sean View Post
    I've never had success with them, ngk's or single prong platinum Bosch.
    I'm running NGKs gapped at .05 with HEI just fine.

  2. #452
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Result of a photo-shoot Friday night:



    The crew simply drove to my apartment and I sputtered the car into two parking spaces so that there was enough room for everyone.

    Farrar
    3.0L, automatic, carbureted

  3. #453
    Not dead yet, also Admin. sean's Avatar
    Join Date:  May 2011

    Location:  Dahlonega GA

    Posts:    2,462

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    Result of a photo-shoot Friday night:
    very Cool! you look pretty mean behind the wheel.
    eBay selling at it's best I can tell you stock Delorians and quite a bit of slugs so the Turbo is a super nice up-grade.
    K-Jet: Causing electrical issues since November 5th 1955

  4. #454
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by sean View Post
    very Cool! you look pretty mean behind the wheel.
    I was told to snarl. Heh.

    Well at least my car looks good while it sits. :P

    Farrar
    3.0L, automatic, carbureted

  5. #455
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    I have given up trying to make things any better.

    Having new O-rings under the intake manifold, today I tested with my MityVac every vacuum line in the engine compartment. They're all tight. So I re-connected the vacuum lines to the carburetor/manifold, turned the idle air mixture screws to 2.5, backed the curb idle screw off the throttle, connected the battery, and turned the key. Amazingly, the engine started without the booster battery. I took this to be a good sign. But even at 1500 RPM (on the fast-idle cam) the engine was still stumbling.

    I waited for the engine to warm up (radiator fans came on). After that, I had to use the curb idle screw to press on the throttle plates, because the engine was stumbling badly and wanted to die below 900 RPM.

    Using the curb idle screw pressing on the throttle, I set the idle to about 950 RPM.

    Tweaking the idle air mixture screws did nothing to improve the situation -- messing with them only made the engine run worse, so I put them back at 2.5 turns and left them alone after that.

    Just for good measure, after the engine was warmed up I pushed on the throttle and sprayed some carb cleaner down the throat of the carburetor. It smelled bad but did nothing to improve the engine's stumble.

    Once again, for good measure, I verified spark on each cylinder with my timing light.

    I sprayed carb cleaner around the surfaces where the manifold meets the engine block. Although I smelled what smelled like burning carburetor cleaner, I saw nothing coming out the exhaust and noticed no difference in the running of the engine so I assume what I was smelling was the carb cleaner evaporating very quickly off of the hot metal surfaces in the engine compartment.

    Just for good measure, I let the car sit and idle while the radiator fans came on and shut off a few times. Nothing else really happened ...

    ... except that I noticed the EFFING OIL LEAK IS BACK AGAIN. So I will no longer have a nice dry engine compartment like I did for a few weeks; it's back to changing the air filter and mopping up oil out of the engine valley every time I drive, avoiding rain because my belts will slip, and having a fine mist of oil covering everything in the engine compartment, including my hands whenever I work back there.

    Since I can't even get the engine to idle right, I'm not going to bother trying to fix the oil leak anymore. I'm not even going to try to get the engine to idle right. I'm not going to drive the car unless I have to. There's just no point. The situation can't be improved, so I am just going to accept what I have -- a thirty-year-old car that runs like crap, has no air conditioning, dies at random intervals, and will probably catch on fire again if I keep it long enough. Oh, well. I hardly ever drive the thing anymore, anyway (unless I have an extra few hours to get it towed).

    Farrar
    Last edited by Farrar; 10-01-2011 at 04:44 PM.
    3.0L, automatic, carbureted

  6. #456
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    There's just no point. The situation can't be improved, so I am just going to accept what I have -- a thirty-year-old car that runs like crap, has no air conditioning, dies at random intervals, and will probably catch on fire again if I keep it long enough. Oh, well. I hardly ever drive the thing anymore, anyway (unless I have an extra few hours to get it towed).
    Since you no longer seem to need it, would you be interested in selling your crankshaft pulley?

  7. #457
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,636

    My VIN:    03572

    Just a wild guess. I would try another ignition coil.
    Dave M vin 03572
    http://dm-eng.weebly.com/

  8. #458
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Bitsyncmaster View Post
    Just a wild guess. I would try another ignition coil.
    Next time I'm around that his car I'm going to offer to swap parts until things start running fine.

  9. #459
    Administrator Ron's Avatar
    Join Date:  Jun 2011

    Location:  North GA

    Posts:    6,200

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by stevedmc View Post
    Since you no longer seem to need it, would you be interested in selling your crankshaft pulley?
    You gonna take it off?

  10. #460
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Ron View Post
    You gonna take it off?
    It can't be any more difficult to remove than mine.

Page 46 of 111 FirstFirst ... 36 44 45 46 47 48 56 96 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •