FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 78 of 111 FirstFirst ... 28 68 76 77 78 79 80 88 ... LastLast
Results 771 to 780 of 1102

Thread: Farrar's car blog

  1. #771
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by Farrar View Post
    Really? Okay, it looks pretty flimsy to me, but I might as well give it a try! Thanks.
    If you're doing them in large quantity you might find yourself wishing for something a little easier to use, but for just the two at the license plate frame or other one-offs, the shim works a treat.
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  2. #772
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by jawn101 View Post
    If you're doing them in large quantity you might find yourself wishing for something a little easier to use, but for just the two at the license plate frame or other one-offs, the shim works a treat.
    Yeah, it worked pretty well just now -- I replaced the one jack-nut that was missing, and then stopped when I realized that the screws I bought are a hair too short. Three more to go, but I will have to buy more machine screws first.

    BTW, when the original jack-nut fell out, it left a hole larger than original, which is why I went with 1/4"-20 machine screws. I had to push the new jacknut in with my thumb, but it didn't deform.

    Also, the heads of the new screws are just big enough to fill the countersink in the license plate frame. In fact, they may stick out a hair, but I don't think anyone will notice, especially since they're black. It's too dark to get a picture now, but I will try to snap one tomorrow.
    3.0L, automatic, carbureted

  3. #773
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Okay, now that my girlfriend is out of town for two days, it's time for me to turn the livingroom into a workshop.

    First task: the loose seat studs. Do I JB-Weld them back on, or should I ask a friend of mine who has a TIG welder at his house if I can bring the seats to him? I don't know the different types of welding (TIG, MIG, is there another?) so I am not sure if his would be the right type. What do y'all think?
    3.0L, automatic, carbureted

  4. #774
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,591

    My VIN:    06960

    Any weld will be better than JB....Weld...

    TIG.
    Jim Reeve
    DMC6960

  5. #775
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by dmc6960 View Post
    Any weld will be better than JB....Weld...

    TIG.
    Especially with something that will see constant shear forces like the seat bolts, JB "weld" just won't cut it.
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  6. #776
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by dmc6960 View Post
    Any weld will be better than JB....Weld...

    TIG.
    Quote Originally Posted by jawn101 View Post
    Especially with something that will see constant shear forces like the seat bolts, JB "weld" just won't cut it.
    OK, thanks, guys. I have sent him an e-mail. Fingers crossed -- he's a pretty busy guy.
    3.0L, automatic, carbureted

  7. #777
    Let's see if you bastards can do 90. dvonk's Avatar
    Join Date:  May 2011

    Location:  Omaha, NE

    Posts:    1,755

    My VIN:    loading, please wait...

    Quote Originally Posted by jawn101 View Post
    Especially with something that will see constant shear forces like the seat bolts, JB "weld" just won't cut it.
    +1, JB Weld is great stuff in certain circumstances, but it is too brittle to flex if either piece of the 'weld' moves at all.
    Last edited by dvonk; 03-08-2012 at 12:37 AM.
    Obtain-O-Meter: 128%
    as of 2016/08/04
    0%|====|====|====|====|====50%====|====|====|====|====|100%

  8. #778
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by dvonk View Post
    +1, JB Weld is great stuff in certain circumstances, but it is to brittle to flex if either piece of the 'weld' moves at all.
    Sounds to me like JB-Weld is not an adhesive at all. Disappointing.

    Anyway, I hope the guy I know with the TIG welder at his house e-mails me back.

    In other news, remember the plywood behind the passenger seat? I asked a friend of mine if it would be possible to cut something that large in his shop. He said it's easy-peasy and will take a matter of minutes to cut -- all three pieces if I desire. Nice! Now I just have to wait for him to get back in town. And buy a saber saw and a sheet of 1/2" plywood.
    3.0L, automatic, carbureted

  9. #779
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by Farrar View Post
    He said it's easy-peasy and will take a matter of minutes to cut -- all three pieces if I desire. Nice!
    Is there a template for cutting these out there somewhere? It seems like the consensus is that in most cars, there's more epoxy than wood back there and it's impossible to get the panels off without destroying them. My passenger side and center piece are OK, but the driver's side is dry rotted at the bottom where the compartment door sits, so I'd love to make a new one. But what's left of the panel is so fragile there's no way I'd get it off in a piece that could be used as a template.
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  10. #780
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    I would use a tape measure to measure from the top of the panel all the way to the floor before you remove what's left of the panel, and then use that measurement when you make your marks to cut the new piece.

    My driver's side wood panel is still adhered. I'd make a template for you, but 1) I can't remove it without probably cracking the fiberglass, and 2) knowing how DeLoreans were put together, no two of these wood panels are alike.
    3.0L, automatic, carbureted

Page 78 of 111 FirstFirst ... 28 68 76 77 78 79 80 88 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •