If you're lucky, you will be able to find a good noise dampener to adhere to the back of the plywood panels. After looking back there I think I have decided that I can probably get away with 1/2" of foam, assuming it is soft enough to compress where the tolerance isn't quite so large.
I have questions, you have answers... Seems reasonable enough, right?
Farrar
Update: McMaster sells an adhesive-backed foam rubber which reduces noise by 75% and is one inch thick. It is soft, so it is compressible -- I wonder if I could get away with it behind the wood panels.





One of these days I'll have to attack that project.
Reply With Quote
