FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 15 of 37 FirstFirst ... 5 13 14 15 16 17 25 ... LastLast
Results 141 to 150 of 370

Thread: How to maintain your Delorean for less than $500 a year and put 10,000 miles on it

  1. #141
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by DMCMW Dave View Post
    Maybe folks have finally figured out that if they wait a week or two they can buy it at normal list price. Or can order direct from Apple as well.
    Beats me but I really don't feel like walking into walmart to return 4 of these things. Besides, I could really use the points on my credit card. If I don't get any bites by the end of today I'm gonna try selling them at $25 above cost.

    Shoot, I might even go stand outside the apple store with a sign.

    Quote Originally Posted by DMC5180 View Post
    Time to get back on topic.
    Yeah, back on topic. One of the bolts that holds the idler pulley in place ain't staying snug so I'm going to have to repair the threads on the timing chain cover with a heli coil. I don't have a kit so I went to NAPA and ordered one for about $50.

    Dad has the receipt since he will be picking it up on tuesday. I'll add that to the list when I put the new threads in probably on tuesday.

  2. #142
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    4,042

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    Quote Originally Posted by stevedmc View Post
    Beats me but I really don't feel like walking into walmart to return 4 of these things. Besides, I could really use the points on my credit card. If I don't get any bites by the end of today I'm gonna try selling them at $25 above cost.

    Shoot, I might even go stand outside the apple store with a sign.
    These aren't limited addition (NIKE) Ipads with rabid EBAY flippers camping outside.


    Quote Originally Posted by stevedmc View Post
    Yeah, back on topic. One of the bolts that holds the idler pulley in place ain't staying snug so I'm going to have to repair the threads on the timing chain cover with a heli coil. I don't have a kit so I went to NAPA and ordered one for about $50.

    Dad has the receipt since he will be picking it up on tuesday. I'll add that to the list when I put the new threads in probably on tuesday.

    I would spread the cost of the kit out. It comes with 10 inserts. so for now you will be consuming 1 at $ 5.00 The rest of the kit can be used in the future so consider it a tool. I don't count tools as an expense since they can be used on other things.
    DENNIS

    VIN 5180, Frame 3652, STAGE II​, EPS​, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  3. #143
    Senior Member
    Join Date:  May 2011

    Posts:    1,315

    My VIN:    03238 Grey & Black Hybrid - Auto - work in progress Former owner 10902 - Universal 93 Raffle Car

    Quote Originally Posted by stevedmc View Post
    One of the bolts that holds the idler pulley in place ain't staying snug so I'm going to have to repair the threads on the timing chain cover with a heli coil. I don't have a kit so I went to NAPA and ordered one for about $50. y.
    Or, you could get a tap and go with the next bolt up in size, that would be about 10% of the cost of the helicoil kit...

  4. #144
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by TTait View Post
    Or, you could get a tap and go with the next bolt up in size, that would be about 10% of the cost of the helicoil kit...
    Yeah, and then I would have to drill out the spacer to make it fit risking damage to it.

    Incidentally, the place my insurance company wants me to use gave me a call this afternoon. Its called Bill Hood Collision Center in Hammond, LA.

    I talked with their service manager and I just might let them do the work. He mentioned that his uncle owns a Delorean as well, so at least I won't have to answer a bunch of stupid questions from the service manager when I bring it in.

    Shoot, I might even be able to get this guys uncle to join our local group.

    Anyway, I told the guy I am a little busy this week and I will get it into his shop as soon as I can. He acted like he could meet me at the shop this Saturday if necessary.

    I'll see how things go with the AC pulley and will take it from there.

  5. #145
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by stevedmc View Post
    Bill Hood Collision Center in Hammond, LA.
    Is that the same Bill Hood as owns several car dealerships around the state?
    3.0L, automatic, carbureted

  6. #146
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    Is that the same Bill Hood as owns several car dealerships around the state?
    I think so. They are a pretty big operation.

  7. #147
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    That may be in your favour. I did not have much luck with a couple of smaller body shops when I was in some minor bump-ups after first moving down here, but my insurance company steered me toward Lakeside Collision in Metairie even though I had a Chrysler. They did a good job, had no problems with the insurance paperwork, and didn't drag their feet.
    3.0L, automatic, carbureted

  8. #148
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Well, in other news I have some more expenses to add to the list. I don't have my receipts in front of me so I'll just mention what I did in this post and I will update the numbers in a day or so.

    Sometime last year I purchased a Puegot 604 manifold. I paid $165 for it shipped from Australia. It has been sitting in the closet since then. Well about 2 weeks ago Bill found out about it and offered to buy back my fabricated manifold/carb and to send me an adapter plate and carb that would fit this manifold. I shipped Bill my 604 manifold about a week ago via USPS for $14.65.

    About two days ago it came in the mail and I began to install it. I had to replace my throttle cable because I messed up the end on my original cable and couldn't thread it as needed. I got a Delorean throttle cable with a pack of ends to crimp on the cable for about $4.20 at Home Depot.

    I also installed two heli coils where the AC tensioner fastens into the engine. My dad paid something like $49.54 for the kit but I cant remember exactly. The receipt is at home. If the holes in the engine bay are the same I plan to heli coil where my manifold bolts down as well.

    Bill has plans for my old manifold. I believe he plans to give me a rebate for the manifold I originally bought from him. Once I get my "rebate" this manifold change over will be free (including manifold) with some extra cash in my pocket. I'll update the numbers when it is all said and done.
    Attached Images

  9. #149
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    What sort of tools and materials do you need to crimp ends onto a wire rope/cable like you did with your new throttle cable? I have been putting off my cruise control installation because the end of the cable is frayed and I do not know how to fix it. Some sort of crimp would be perfect, I think.
    3.0L, automatic, carbureted

  10. #150
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    What sort of tools and materials do you need to crimp ends onto a wire rope/cable like you did with your new throttle cable? I have been putting off my cruise control installation because the end of the cable is frayed and I do not know how to fix it. Some sort of crimp would be perfect, I think.
    I used my vice grips and some sort of cheap aluminum crip ends. It is super easy to run a new cable. Next time I am in the area I will do it for you. I might even pay for the parts.

    This is what I bought. I seem to remember the kit (set of 4) costing me a little more than $2.

    http://www.homedepot.com/h_d1/N-25ec...yword=aluminum wire&storeId=10051

Page 15 of 37 FirstFirst ... 5 13 14 15 16 17 25 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •