I'm interested in a windshield antenna. Mine has giant scratches in it from the previous owners dog. Never replaced it though because it has the antenna.
Location: Orlando, Florida
Posts: 2,734
My VIN: 01643
Club(s): (DCF) (DCO) (DCUK)
I'm interested in a windshield antenna. Mine has giant scratches in it from the previous owners dog. Never replaced it though because it has the antenna.
Location: Baton Rouge, Louisiana
Posts: 3,047
My VIN: 16510 and carbureted
Club(s): (GCD) (SEDOC) (DCUK)
Location: Baton Rouge, Louisiana
Posts: 3,047
My VIN: 16510 and carbureted
Club(s): (GCD) (SEDOC) (DCUK)
Location: Reedsburg, WI
Posts: 4,042
My VIN: 5180
Club(s): (DMWC) (DCUK)
You May be A REDNECK IF: You plan on customizing your windshield with a Diamond, saran wrap and Glue.
Good thing Illinois I-pass has virtual tolling aka V-tolling. I have one transponder w/3 cars registered to it. You can have up to 4 on one transponder. I don't need the transponder in the car. The cameras automatically take photos of your plates and match them to the transponder. I've gone through the toll system a couple times without it. When I got home I checked my I-pass account and sure enough the tolls were registered as V-tolls using my License Plate.
As far as the garage door opener there may be ways around that too. I don't have mine mounted by the windshield and it works up to a block away without facing the the garage. Might simply mean I have to get creative with placement.
I am curious about the yellow-ish tint. Is this like those windshields you occasionally see with a gold-ish tint reflection? I alway thought the original glass had a bronze-ish tint.
I'm also curious to know if the UV/IR is surface applied or imbedded in the laminated glass?
DENNIS
VIN 5180, Frame 3652, STAGE II, EPS, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID headlights, SPAX user since 2009, Eibach springs, M Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, REAL MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.
Location: Taylors SC
Posts: 5,327
My VIN: (former)05429
Club(s): (DMWC) (DCUK)
[QUOTE=DMC5180;48235]I am curious about the yellow-ish tint. Is this like those windshields you occasionally see with a gold-ish tint reflection? I alway thought the original glass had a bronze-ish tint.
QUOTE]
Another difference is that there is no dark band across the top. It is entirely the same color.
Yours is here in the box, but I've decided not to temp fate by unpacking it and taking it outside to see the true color (I did make sure it arrived unscathed).
Dave S
DMC Midwest - retired but helping
Greenville SC
Well, you may not want to make a habit of it. Considering your from out of state and aren't doing it on a daily basis your probably alright. While I was researching if the I-Pass works on the Florida Turnpike (it does not BTW, nor will E-ZPass users), I found this bit of information (emphasis mine)...
3. License Plate Transponder (LPT)
Less than 1 percent of vehicles have windshields or systems that interfere with transactions using the windshield-mounted transponder. In this case, a license plate transponder (LPT) is required, which mounts on the front bumper of your vehicle, is available for the same price as a standard transponder. Check the list of vehicles we've identified that require LPTs. LPTs are available at any Tollway Customer Service Center and can be ordered through the Customer Call Center.
In general, windshields that contain metal in the glass (metal oxide) and mirrors with compass or temperature readings may prevent the I-PASS signal from being read properly. Also, windshields with the following glass features may interfere with the I-PASS signal and require alternative or exterior mounting: solar ray, solar tint, heated, heat reflected, insulated, Insta-Clear. If you are unsure if your vehicle has one of these listed features, contact your car dealership.
Instructions for Mounting a License Plate Transponder (LPT):
Identify the back of the LPT by finding the arrows next to the mounting holes.
The LPT must be fastened to the front license plate using the plate's top mounting screws.
Use your license plate screws and the knock-out holes in the LPT case to fasten the transponder to your front license plate.
Unsuccessful I-PASS Transactions will be Vtolled
Video Tolls (Vtolls) are tolls that could not be deducted from your account at the time of the toll transaction. These are typically attributed to a missing, improperly mounted or inactive transponder. It is important to periodically review your account activity to ensure the transponder is functioning properly. Excessive Vtolls might result in penalties, so please mount your transponder correctly and ensure it is working properly.
Jim Reeve
DMC6960