To quote James T. Kirk, "Well, that's... just... lovely."
I finally got back to the replacement panel, and when I was drilling one of the holes, the drill bound up inside the plywood.
SANY0171.jpg
... and it tore off the piece I had adhered to the back.
SANY0172.jpg
So that project is now ruined. I no longer have access to my friend's shop or equipment, because he's going to be too busy to help me over the next few weeks. So it looks like I will put the original damaged wood panel back inside the car. The confidence I had in myself which made me think that I could make a new console vanished instantly as soon as that back piece was ripped off. Nonetheless, I will go ahead and buy the plastic; as with all of my projects, the original pieces and parts will be kept on hand so that in the event of failure the stock parts can be put back on.
Since Liquid Nails was unable to adhere two pieces of plywood together under the stress of a 3/8" drill bit, I doubt the same product would be strong enough to adhere a piece of wood to a fiberglass body shell under the stress of heat, humidity, and vibration. What adhesive would y'all suggest?




Reply With Quote
