Location: Baton Rouge, Louisiana
Posts: 3,047
My VIN: 16510 and carbureted
Club(s): (GCD) (SEDOC) (DCUK)
Location: Omaha, NE
Posts: 1,755
My VIN: loading, please wait...
Obtain-O-Meter: 128%
as of 2016/08/04
0%|====|====|====|====|====50%====|====|====|====|====|100%
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
Picking up the keys to the new apartment (and the remote for the garage!) on Friday. This will be -- I hope -- the fastest move ever: I have been packing every night since we decided to get out, with the exception of yesterday when I had a migraine. Man, nobody ever told me how bad migraines can be... I hope this doesn't mean that I have suddenly become prone to them, because aging suddenly looks a lot worse than it did last week.
3.0L, automatic, carbureted
Location: Omaha, NE
Posts: 1,755
My VIN: loading, please wait...
Obtain-O-Meter: 128%
as of 2016/08/04
0%|====|====|====|====|====50%====|====|====|====|====|100%
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
I think one of those MaxJax things would be enough for my personal garage. I am sure I can convince my significant other that it would be worth the investment.![]()
3.0L, automatic, carbureted
Location: Sacramento-ish
Posts: 4,408
My VIN: 02100
Club(s): (NCDMC) (DCUK)
Jon
1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
restoration log, March 2011 to present
full and detailed photo restoration log
Location: Fort Lauderdale
Posts: 4,740
My VIN: 02613
Club(s): (DCF)
Ha! I was speaking in the long term for when we are in our own place and not renting... but yeah, it would be interesting to see if I could get away with it.
I will be making some alterations to the apartment (putting shelves and clothing rods in closets, etc.) but those can all be easily undone with some spackling paste.
I am still wondering why I cannot start the car with the key. I ignored the weird blue wire and connected the two red/white wires the way they're supposed to be. My car has had the early-VIN wiring mod done and I have verified with Steve's help that it was done properly. I have verified the Neutral Safety Switch works and has good contact, and I have verified that the Start Inhibit Relay works and has good contact. Yet with everything wired up as it is supposed to be I still have to jump the starter motor manually. I am stumped, but I don't want to have to tear the wiring harness apart just now. Any thoughts?
3.0L, automatic, carbureted