FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 116 of 954 FirstFirst ... 16 66 106 114 115 116 117 118 126 166 216 616 ... LastLast
Results 1,151 to 1,160 of 9533

Thread: What have you done to your DeLorean today?

  1. #1151
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by Jonathan View Post
    Question for the group. Is what Kevin described here "typical?" I.e. do 51% or more of the cars out there have melted fuses in their 31 years on the road? I wonder because my car has no fuse box melting evidence. There are plenty of other typical issues on the car (angle drive for example) but melting fuses has not been one of them.
    Yes, I think it is. My car was very well kept over its life, but still had melted fuses.

    Today I drove it to work. One last trip before the major surgery this weekend. Tonight I pulled the lower engine cover, rear fascia, stiffener, impact absorber, muffler and heat shields. Cleaned and shined all the muffler hardware - still shiny perfect yellow zinc under the inch thick blackness!

    Tomorrow I will pull the T-panel, headliners and drive axles, then keep cleaning things until the engine removal brigade arrives Saturday morning....
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  2. #1152
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,609

    My VIN:    03572

    Quote Originally Posted by Jonathan View Post
    Question for the group. Is what Kevin described here "typical?" I.e. do 51% or more of the cars out there have melted fuses in their 31 years on the road? I wonder because my car has no fuse box melting evidence. There are plenty of other typical issues on the car (angle drive for example) but melting fuses has not been one of them.
    My guess is yes. I think the connectors used on the OEM box were marginal and when you get oxidation with age it gets hot. Mine had shown sign of heat on the fuel pump fuse but was still working. If any of your fuses don't pull out easy, look closely at it and you will see it has overheated.
    Dave M vin 03572
    http://dm-eng.weebly.com/

  3. #1153
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by mluder View Post
    Is your horn original and if so... did they laugh at it?

    Cheers.
    Steve
    This was my daily driver, not the DeLorean. However, no, my D horns are not stock, just for the record.
    3.0L, automatic, carbureted

  4. #1154
    My friends think I'm nuts jawn101's Avatar
    Join Date:  May 2011

    Location:  Sacramento-ish

    Posts:    4,408

    My VIN:    02100

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by Farrar View Post
    This was my daily driver, not the DeLorean. However, no, my D horns are not stock, just for the record.
    Mine are... my wife says they sound like a Barbie Power Wheels. Maybe it's time to start a new "what aftermarket horns do you like" thread
    Jon
    1981 DMC-12 #02100. July 1981. 5-speed, black, grooved w/flap.
    restoration log, March 2011 to present
    full and detailed photo restoration log

  5. #1155
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,862

    My VIN:    3937

    Quote Originally Posted by mluder View Post
    Is your horn original and if so... did they laugh at it?

    Cheers.
    Steve
    Mine was definitely worthy of being laughed at a few years ago. It was once described as sounding like a dying giraffe.

    Before:



    Sept. 81, auto, black interior

  6. #1156
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,862

    My VIN:    3937

    After:



    Sept. 81, auto, black interior

  7. #1157
    Senior Member vwdmc16's Avatar
    Join Date:  May 2011

    Location:  sacramento

    Posts:    1,418

    My VIN:    1768

    Club(s):   (NCDMC) (DCUK)

    OMG that original horn is so sad! It is a dying giraffe!

  8. #1158
    EFI DeLorean dmc6960's Avatar
    Join Date:  May 2011

    Location:  Minnesota

    Posts:    1,590

    My VIN:    06960

    Quote Originally Posted by vwdmc16 View Post
    OMG that original horn is so sad! It is a dying giraffe!
    Cheap generic auto parts store horns can do wonders. 12 years old and still going strong...

    Jim Reeve
    DMC6960

  9. #1159
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,709

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Quote Originally Posted by Jonathan View Post
    After:

    Not too bad... Very simmilar to the original. What did you use?

    I like the original European sound. Some one once said an American horn sounds like, "GET THE FU@K OUT OF MY WAY!" While the British sounding DeLorean hors sounds like "excuse me... would you mind ever so much if I just... could I please pass through... thanks."

    Cheers.
    Steve
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

  10. #1160
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,862

    My VIN:    3937

    Quote Originally Posted by mluder View Post
    Not too bad... Very simmilar to the original. What did you use?
    http://store.delorean.com/p-6956-ass...-low-note.aspx

    Believe it or not, these are the straight forward ones right off of the DMCH website. I figured one of my horns wasn't chiming in properly, so I bought one each of the low and high note. Super easy to install and for $15 each, quite reasonable. I highly recommend them!


    Sept. 81, auto, black interior

Page 116 of 954 FirstFirst ... 16 66 106 114 115 116 117 118 126 166 216 616 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •