FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 8 of 77 FirstFirst ... 6 7 8 9 10 18 58 ... LastLast
Results 71 to 80 of 763

Thread: Ask Bill about carbing a DeLorean and other K-Jet/Carb tangets

  1. #71
    Senior Member Ashyukun's Avatar
    Join Date:  Jun 2011

    Location:  Lexington, KY

    Posts:    242

    My VIN:    16655

    Quote Originally Posted by content22207 View Post
    Works for me:
    Attachment 736
    (Is anyone ever going to move archives from the old site to this one...).

    Bill Robertson
    #5939
    One question on this... doesn't the annoying white/grey wire to the coil come from the removed box there (Idle ECU, I believe...)?

  2. #72
    Banned
    Join Date:  Jun 2011

    Posts:    1,068

    CIS has nothing to do with ignition. They are two totally separate systems.

    I am currently running with a Ford Duraspark module temporarily substituted for the Bosch ignition ECU (testing for another owner):
    Duraspark1.jpg
    It's just laying loose in the ECU compartment.

    Bill Robertson
    #5939

  3. #73
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by Ashyukun View Post
    It's technically pronounced Ash-you-coon... '-kun' is a common-usage honorific.
    Ah, so that would make our mutual friend "Bill-sama"?

    Thanks for the clarification.

    Farrar
    3.0L, automatic, carbureted

  4. #74
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by content22207 View Post
    I am currently running with a Ford Duraspark module temporarily substituted for the Bosch ignition ECU (testing for another owner)
    I wonder if he is planning any major tests this weekend. We are having a tech day and cruise in this saturday.

  5. #75
    Banned
    Join Date:  Jun 2011

    Posts:    1,068

    Owner is in Georgia.

    We don't for certain whether his Bosch unit is bad -- I just wanted to be ready in case it is (you can't buy a replacement Bosch ECU over the counter).

    I do intend to make another adapter to keep in my car, for my own future contingencies. Duraspark modules are stock items at all parts houses nationwide.

    To be brutally honest, I haven't noticed any difference running a Ford module versus Bosch. There's a loose wire from the Duraspark ECU that is normally attached to a starter trigger signal (not present in the Bosch harness), but my car is starting just fine without it.

    Bill Robertson
    #5939
    Last edited by content22207; 07-05-2011 at 02:30 PM.

  6. #76
    Senior Member Ashyukun's Avatar
    Join Date:  Jun 2011

    Location:  Lexington, KY

    Posts:    242

    My VIN:    16655

    Quote Originally Posted by Farrar View Post
    Ah, so that would make our mutual friend "Bill-sama"?

    Thanks for the clarification.

    Farrar
    I would probably go with -sensei vs. -sama.

  7. #77
    Not dead yet, also Admin. sean's Avatar
    Join Date:  May 2011

    Location:  Dahlonega GA

    Posts:    2,462

    Club(s):   (SEDOC) (DCUK)

    The delicious tangent can be continued here:
    http://dmctalk.org/showthread.php?70...arbs-thread***

  8. #78
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by Ashyukun View Post
    I would probably go with -sensei vs. -sama.
    Pfft -- shows you how long it's been since I watched any anime. OK, back on topic...

    Bill, I'm gearing up to replicate your ground bus. Can you please explain why you used plates to connect some of the wires instead of grounding them directly to the brackets in the compartments behind the seats -- was it because the bolts were different sizes? Thanks!

    Farrar
    3.0L, automatic, carbureted

  9. #79
    Tweedledumber DCUK Martin's Avatar
    Join Date:  May 2011

    Location:  DeLorean Cars, UK

    Posts:    593

    Quote Originally Posted by content22207 View Post
    RPM relays are notorious for failure, especially after prolonged use.
    This is Bill's opinion and is not backed up by significant data.

    Quote Originally Posted by Ashyukun View Post
    One question on this... doesn't the annoying white/grey wire to the coil come from the removed box there (Idle ECU, I believe...)?
    That "annoying grey wire" is your ignition signal, without it, your engine will not work
    Martin Gutkowski
    -------------
    Very part time DeLoreaner...

  10. #80
    Banned
    Join Date:  Jun 2011

    Posts:    1,068

    Quote Originally Posted by Farrar View Post
    Bill, I'm gearing up to replicate your ground bus. Can you please explain why you used plates to connect some of the wires instead of grounding them directly to the brackets in the compartments behind the seats -- was it because the bolts were different sizes?
    Brackets in the ECU and relay compartments are as crappy as the rest of the car (my opinion). That ground block is 1/8" thick stainless steel. The crappy (my opinion) ECU bracket merely has to hold it still, which debatably is within its realm of capability.

    I have no idea what I may need to ground in the future. That's the purpose of the 1/4" center stud -- to give me a convenient, non-crappy ground point for anything I ever need to attach.

    I also am using the stainless bar across the front of the car as a ground block (both ground junctions behind the headlights are tied into it with 8 gauge wire). It is attached to the radiator bracket bolt with 8 gauge wire -- that's the only part of my bus that isn't 4 gauge (ground bus originates at that bolt).

    Bill Robertson
    #5939
    Last edited by content22207; 07-06-2011 at 07:51 PM.

Page 8 of 77 FirstFirst ... 6 7 8 9 10 18 58 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •