FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21

Thread: Otterstat crossover/interchange

  1. #1
    Member
    Join Date:  Dec 2012

    Location:  Drums PA

    Posts:    76

    My VIN:    10440

    Otterstat crossover/interchange

    Is there another otterstat that is interchangable with a Delorean one? i finally received my package from Hervey that I ordered last Wednesday, of course the otterstat is missing and i'm not waiting another week for one.

    Thanks
    Brian

  2. #2
    Member
    Join Date:  Dec 2012

    Location:  Drums PA

    Posts:    76

    My VIN:    10440

    After searching through all of the parts it turns out I am missing the o-rings as well, so I have to wait for an
    other shipment.

  3. #3
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    If it were me and I was pressed for time... I'd look for a push-in radiator fan switch and seal from a 1983 Volvo 760. Same engine, so presumably same thermal trip. But only guesswork on my part. And at some point Volvo changed to a threaded switch. I'd only do it if I could walk into a store and put my fingers on the part. Getting the wrong one mail-order and then having to pay to get it shipped back would be more hassle than it's worth. Probably best just to wait for your next order. In my humble opinion.
    3.0L, automatic, carbureted

  4. #4
    Senior Member ramblinmike's Avatar
    Join Date:  May 2011

    Location:  Alton, IL

    Posts:    302

    My VIN:    00910

    Quote Originally Posted by Farrar View Post
    If it were me and I was pressed for time... I'd look for a push-in radiator fan switch and seal from a 1983 Volvo 760. Same engine, so presumably same thermal trip. But only guesswork on my part. And at some point Volvo changed to a threaded switch. I'd only do it if I could walk into a store and put my fingers on the part. Getting the wrong one mail-order and then having to pay to get it shipped back would be more hassle than it's worth. Probably best just to wait for your next order. In my humble opinion.
    The Volvo 760 crossover sure looks like the right part.

    4.jpeg

    Santech MT0569
    On @ 192 Deg F
    Off @ 188 Deg F
    Last edited by ramblinmike; 03-04-2013 at 10:01 PM.
    Yeah, it's dirty. I drive it.

  5. #5
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by ramblinmike View Post
    The Volvo 760 crossover sure looks like the right part.
    Wow, you're right! Not sure if our clip would hold it, though.

    Of course, you could always use a zip-tie to hold it in... some people do that anyway as a back-up to the original clip.

    I think you may be on to something there... if you can find it locally, it may be worth a shot!
    3.0L, automatic, carbureted

  6. #6
    Senior Member
    Join Date:  May 2011

    Posts:    1,315

    My VIN:    03238 Grey & Black Hybrid - Auto - work in progress Former owner 10902 - Universal 93 Raffle Car

    Quote Originally Posted by galbiati View Post
    Is there another otterstat that is interchangable with a Delorean one? i finally received my package from Hervey that I ordered last Wednesday, of course the otterstat is missing and i'm not waiting another week for one.

    Thanks
    Brian
    Waiting only another week for a part Hervey forgot? You are optimistic, aren't you? He likely does not have them in stock.

  7. #7
    Vin3299's Doc DeLorean03's Avatar
    Join Date:  May 2011

    Location:  Eglin AFB, FL

    Posts:    1,603

    My VIN:    3299

    Get the crossover part and give it a try. Can't hurt....
    DMCTalk.org Moderator

    Actual snippet of a conversation from Sept 2013:

    Me: Eddie, I can't wait to get the car back when you're done with it.

    Eddie: Yeah, you'll be able to give the car gas, and it won't be - like - embarrassing....

  8. #8
    Member
    Join Date:  Dec 2012

    Location:  Drums PA

    Posts:    76

    My VIN:    10440

    What about the o rings and gaskets for the intake?

  9. #9
    Vin3299's Doc DeLorean03's Avatar
    Join Date:  May 2011

    Location:  Eglin AFB, FL

    Posts:    1,603

    My VIN:    3299

    Get everything from DMCMW - takes all of 2 days to get me my stuff and I'm over here in Dayton.
    DMCTalk.org Moderator

    Actual snippet of a conversation from Sept 2013:

    Me: Eddie, I can't wait to get the car back when you're done with it.

    Eddie: Yeah, you'll be able to give the car gas, and it won't be - like - embarrassing....

  10. #10
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by DeLorean03 View Post
    Get everything from DMCMW - takes all of 2 days to get me my stuff and I'm over here in Dayton.
    True enough. I thought you meant the seal for the otterstat when you said "o ring." If you need more than one part, then Dave & Julee are your source.
    3.0L, automatic, carbureted

Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •