FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 64 of 111 FirstFirst ... 14 54 62 63 64 65 66 74 ... LastLast
Results 631 to 640 of 1102

Thread: Farrar's car blog

  1. #631
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by qwerk View Post
    What about velcro?
    Quote Originally Posted by qwerk View Post
    To clarify, I mean for the seat back, not your fingers.
    Thanks for the clarification.

    I thought about Velcro, but I would worry that the adhesive would give up when it gets hot inside the car. (And it does get hot -- over 160°F in summer.)

    Farrar
    3.0L, automatic, carbureted

  2. #632
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Apropos of nothing, I just thought I'd mention that my PT Turbo, which gets less than 17 MPG in city driving, stunned me by getting almost 24 MPG at highway speeds on my trip from La. to NC. I set the cruise control at 64 MPH and saw the "Avg. MPG" readout on the dashboard climb and climb and climb until I had to stop to get gas. I got from Peachtree City, Ga. to Charlotte, NC on less than half a tank -- which means less than 7.5 gallons. Nice!

    I hope everyone is having a happy Christmahannukwanzaayule

    Farrar
    3.0L, automatic, carbureted

  3. #633
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Now that it's 2012 I mentioned to my girlfriend yesterday that I am very pleased that the only things I need to fix on #2613 between now and DCS Orlando are the air conditioning and cruise control.

    So naturally, last night I had a dream where I was driving the DeLorean and everything went wrong, from the defroster to the windows, and fluids started spewing from underneath the car like a gag from a silent film.

    We're off to a good start, at least mentally...

    Happy New Year, everybody!

    Farrar
    3.0L, automatic, carbureted

  4. #634
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Since I unexpectedly had a free day from work yesterday and my college classes for this semester don't start until tomorrow, I had some car time yesterday afternoon. :-) Result: I double-checked the connection at the inertia switch. When I put my multimeter between the terminals on the plug, I get higher voltage than I do when I put the + terminal on the plug and the nearest body bolt, so I think the problem I had with the fuel pump dying last summer was a problem with connectivity but rather the result of a quality control issue with the manufacturer of the fuel pump. I had lost the little plastic cap that sits on top of the plunger -- it had fallen between the body tub and the carpet. I found it yesterday and put it back on. Confirmed function of the inertia switch by lifting the plunger. So all is well there.

    I decided to install the new cigarette lighter, but was unable to because I could not separate the green plastic ring from the cylinder it's snapped onto. Scraped one of my knuckles pretty badly in the process as the little screwdriver I was trying to use to push the tab back slipped and tried to draw blood in revenge. So I just put the hole plug back in.

    One thing I noticed while underneath the dashboard: evidently, a previous owner of my car "fixed" the kneepads from coming loose by putting thread inserts in them. These inserts are themselves beginning to come out and the kneepads are rattly and shaky. Unfortunately the material of the kneepads themselves was split by the insertion of the thread inserts (probably the P.O. did not drill the appropriate-sized hole). It looks like I will have to replace all of my kneepads before June when my girlfriend rides in the car with me and puts her feet all over them. I am currently thinking of options for replacing the kneepads -- I will probably make them out of stiff foam and wire them for footwell lighting. I have lots of black vinyl to make kneepad covers if necessary.

    Farrar
    3.0L, automatic, carbureted

  5. #635
    Senior Member Bitsyncmaster's Avatar
    Join Date:  May 2011

    Location:  Leonardtown, MD

    Posts:    9,636

    My VIN:    03572

    Quote Originally Posted by Farrar View Post
    I decided to install the new cigarette lighter, but was unable to because I could not separate the green plastic ring from the cylinder it's snapped onto. Scraped one of my knuckles pretty badly in the process as the little screwdriver I was trying to use to push the tab back slipped and tried to draw blood in revenge. So I just put the hole plug back in.
    Farrar
    I found the same problem but luckly I found it before I put it in the car. So I cut the little tabs off the green plastic. But that change required me to hot glue the metal part to the plastic or it would pull out when I used it.
    Dave M vin 03572
    http://dm-eng.weebly.com/

  6. #636
    Senior Member AdmiralSenn's Avatar
    Join Date:  May 2011

    Posts:    443

    Quote Originally Posted by Farrar View Post

    One thing I noticed while underneath the dashboard: evidently, a previous owner of my car "fixed" the kneepads from coming loose by putting thread inserts in them. These inserts are themselves beginning to come out and the kneepads are rattly and shaky. Unfortunately the material of the kneepads themselves was split by the insertion of the thread inserts (probably the P.O. did not drill the appropriate-sized hole). It looks like I will have to replace all of my kneepads before June when my girlfriend rides in the car with me and puts her feet all over them. I am currently thinking of options for replacing the kneepads -- I will probably make them out of stiff foam and wire them for footwell lighting. I have lots of black vinyl to make kneepad covers if necessary.

    Farrar
    3416 is like this too. I tried JB Welding a proper threaded bolt shank in there but the JB weld didn't stick - it all came out in a plug. I'm exploring other repair options; I'll let you know if I figure out a workable solution.
    Aka Adam S, aka Adam Wright
    1981 DMC-12 #3416, mothballed in preparation for motor swap
    2006 Volvo S60R

  7. #637
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by AdmiralSenn View Post
    I tried JB Welding a proper threaded bolt shank in there but the JB weld didn't stick - it all came out in a plug.
    Same thing happened to me. The material the kneepad is made out of seems to be slightly slippery, not to the touch but to any adhesive or epoxy I try to throw at it.

    I am thinking of carefully removing the kneepads' vinyl covers and crafting new kneepads out of hard foam from the craft store. But then I will have the same problem of how to affix the kneepads to the car. Perhaps a wooden back with thread inserts in it? Perhaps neodymium magnets on the back of the kneepads and a strip of steel on the fiberglass? My mind is wandering at this point; haven't settled on any one solution yet.

    Farrar
    3.0L, automatic, carbureted

  8. #638
    Banned
    Join Date:  May 2011

    Location:  Baton Rouge, Louisiana

    Posts:    3,047

    My VIN:    16510 and carbureted

    Club(s):   (GCD) (SEDOC) (DCUK)

    Quote Originally Posted by Farrar View Post
    Same thing happened to me. The material the kneepad is made out of seems to be slightly slippery, not to the touch but to any adhesive or epoxy I try to throw at it.
    I appologize if I missed something but if all you need is to recover your knee pads, I've got a guy in Hammond that does excellent work.

    He recovered my passenger kneepad for just $50.

    Auto Image - Joel Oliver - (985) 215-1302 www.myautoimage.com

  9. #639
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    Quote Originally Posted by stevedmc View Post
    I appologize if I missed something but if all you need is to recover your knee pads, I've got a guy in Hammond that does excellent work.
    Thanks, but I have the opposite problem -- the vinyl is OK, but the kneepads themselves are falling off because the studs are coming out the back.

    Farrar
    3.0L, automatic, carbureted

  10. #640
    Administrator Ron's Avatar
    Join Date:  Jun 2011

    Location:  North GA

    Posts:    6,200

    Club(s):   (SEDOC) (DCUK)

    If the holes are too big, can't you just get different anchors?
    (I'm not familiar with what you are doing.)

Page 64 of 111 FirstFirst ... 14 54 62 63 64 65 66 74 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •