One thing I noticed while underneath the dashboard: evidently, a previous owner of my car "fixed" the kneepads from coming loose by putting thread inserts in them. These inserts are themselves beginning to come out and the kneepads are rattly and shaky. Unfortunately the material of the kneepads themselves was split by the insertion of the thread inserts (probably the P.O. did not drill the appropriate-sized hole). It looks like I will have to replace all of my kneepads before June when my girlfriend rides in the car with me and puts her feet all over them. I am currently thinking of options for replacing the kneepads -- I will probably make them out of stiff foam and wire them for footwell lighting. I have lots of black vinyl to make kneepad covers if necessary.
Farrar
3416 is like this too. I tried JB Welding a proper threaded bolt shank in there but the JB weld didn't stick - it all came out in a plug. I'm exploring other repair options; I'll let you know if I figure out a workable solution.
Aka Adam S, aka Adam Wright
1981 DMC-12 #3416, mothballed in preparation for motor swap
2006 Volvo S60R