FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 763

Thread: Ask Bill about carbing a DeLorean and other K-Jet/Carb tangets

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #8
    Banned
    Join Date:  Jun 2011

    Posts:    1,068

    If you need to snap the throttle plates to get them to close all the way, something is wrong with your supplemental return spring (stretched, popped off, etc). A healthy PRV pulls too much vacuum for the compression spring on the throttle cable alone to reliably close the throttle plates, so I add a supplemental tension spring:
    SupplementalSpring.jpg

    A partially closed choke plate will never cause a warm engine to rev high, but it will indeed cause it to struggle low (the poor thing can't breathe). Take the air filter off and look at it -- if the plate is open, it is working normally.

    Converse is of course true for a cold engine: choke plate needs to snap closed, then crack open as soon as the engine is running. Don't pump the accelerator pedal -- just tap it lightly to take the tension off so the choke mechanism can rotate (positions the fast idle cam as well as closes the choke plate).

    Bill Robertson
    #5939
    Last edited by content22207; 08-12-2011 at 12:03 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •