FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 763

Thread: Ask Bill about carbing a DeLorean and other K-Jet/Carb tangets

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Banned
    Join Date:  Jun 2011

    Posts:    1,068

    Quote Originally Posted by Farrar View Post
    I guess you will be wanting this, then.
    I've got a house full of cores already.

    That's an Autolite 2100. The Motorcraft redesign has a few advantages:
    - Better pulloff
    - Better choke plate to choke mechanism adjustment
    - Bigger chimneys (you'll appreciate those if you ever need to fill the bowl manually)
    - PCV in the carb itself (Autolites did PCV through a spacer between the carb and manifold)
    - Spark advance barb (Autolites have a threaded port for a hard line)

    Bill Robertson
    #5939

    Bad news: I just did a cost analysis, and inflation has driven up materials costs for a carb conversion. Bulk aluminum and aluminum pipe for the fuel pump carrier are the largest culprits. Brass fittings are up too, but they were only a couple of dollars to begin with. Fuel pumps have jumped up nearly $15, which is a 33% price hike. Altogether, before going to Autozone to research hose costs, it looks like 5 speed conversions are going cost me slightly more than $1,000 to make. Automatics will be at least $50 higher.

    This assumes my aluminum welder isn't going to increase his labor charge too.

    Still not a bad bargain when you consider *MY* labor is free (including driving to your house to help you install it, but you will have to feed me).

    There is no charge for the tank baffle.

    Bill Robertson
    #5939
    Last edited by content22207; 09-05-2011 at 11:46 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •