FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 763

Thread: Ask Bill about carbing a DeLorean and other K-Jet/Carb tangets

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Administrator Ron's Avatar
    Join Date:  Jun 2011

    Location:  North GA

    Posts:    6,200

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by stevedmc View Post
    Whats the problem?
    I'm thinking (other than trash, electrical) you might be using the wrong pumps or pluming depending on the carb(s)...cycling running wide open or labored, or, mostly pumping through the internal by-pass valve...The ones I see posted around here might be being over worked since they aren't pressure regulated and run ~2 times the pressure required by the float's needle valve, most of the time. They never rest (they are not made to take it like todays internal pumps...diferent "style"). In the old days, we used to use AC adjustable pressure regulated rail mounted pumps or one matched to (slightly above) the float requirements on racers to pitch mechanical pumps and get rid of the drag... The floats needle valve's on-off pressure is not that tight which allows for even more rest time...
    Just a guess and food for thought...I'll see if I can dig up the post if you want or we can talk about it Saturday.
    Last edited by Ron; 10-20-2011 at 05:56 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •