FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 1102

Thread: Farrar's car blog

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #9
    Administrator Ron's Avatar
    Join Date:  Jun 2011

    Location:  North GA

    Posts:    6,200

    Club(s):   (SEDOC) (DCUK)

    +1 Dennis

    =======

    FYI, the yellow/white (actually W/Y) wire you mentioned going to a coil terminal should go to the Neutral Switch -- The yellow/white (W/Y) on the coil terminal goes to the Ballast Resistors....

    The Blue wire is probably a replacement from the ignition switch (or to the solenoid...not enough info...)
    If Dennis' checks don't clear it up, see if the Blue wire has 12V with the key at "Start".
    If not,pull the main coil wire and make certain it is in neutral for Safety. Then jump 12V to the each of the remaining wires you mentioned earlier to find which energizes the solenoid...try the W/R ones first.
    It should be easy from there on....

    Fan Speed Breaker to 30 (Brown).
    Neutral Safety to 85 (W/Y).
    Ignition Switch to 86 (W/R, ?Blue? )
    Starter Solenoid to 87 (W/R, ?Blue?)
    Last edited by Ron; 04-29-2012 at 04:42 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •