FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member

Originally Posted by
DMC5180
Interesting. In this case the Inhibit Relay, is an isolated ground circuit thru the neutral safety switch to ground. But I can see your point in checking resistance.
This bad ground was on the cooling fan relay. My solid state relay still worked but that would have not worked with a mechanical relay. I never liked those double wires crimped into the terminals so my new harness has one wire crimps into a large junction. Should do the top bank that way someday.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules