FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 763

Thread: Ask Bill about carbing a DeLorean and other K-Jet/Carb tangets

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Banned
    Join Date:  Jun 2011

    Posts:    1,068

    Quote Originally Posted by Farrar View Post
    Bill, I'm gearing up to replicate your ground bus. Can you please explain why you used plates to connect some of the wires instead of grounding them directly to the brackets in the compartments behind the seats -- was it because the bolts were different sizes?
    Brackets in the ECU and relay compartments are as crappy as the rest of the car (my opinion). That ground block is 1/8" thick stainless steel. The crappy (my opinion) ECU bracket merely has to hold it still, which debatably is within its realm of capability.

    I have no idea what I may need to ground in the future. That's the purpose of the 1/4" center stud -- to give me a convenient, non-crappy ground point for anything I ever need to attach.

    I also am using the stainless bar across the front of the car as a ground block (both ground junctions behind the headlights are tied into it with 8 gauge wire). It is attached to the radiator bracket bolt with 8 gauge wire -- that's the only part of my bus that isn't 4 gauge (ground bus originates at that bolt).

    Bill Robertson
    #5939
    Last edited by content22207; 07-06-2011 at 07:51 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •