FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-

Originally Posted by
content22207
What kind of failures are you experiencing? My epoxy killed pump just sat there like a bump on a log (didn't do anything). I lost one pump to what appeared to be bearing failure (jumped around so much it was difficult to hold in my hand). It is possible my third pump did not die (the car bogged down just as Louie and I were passing an off ramp, so we zipped off the interstate, into the gas station at the top, and threw the spare into the tank -- it could have been a gust of headwind).
The pump currently in my tank got me Alabama to New Orleans, then went to/from Lexington, Pennsylvania, and DC twice, but I won't hesitate for a second to throw my spare in there if necessary.
Bill Robertson
#5939
The Airtex unit had been making some strange noises the past few weeks. My guess is it was on its way out. Yesterday, 150 miles from home, it started going out intermittently. The car would stall and then start back up (sometimes). I managed to limp around for 15 minutes while I drove around Jackson, MS looking for a place with shade to do some work. I ended up in the ghetto and decided to limp to the entrance ramp to the interstate. Luckily it got that far and then the fuel pump stopped for good.
I honestly spent more time driving around looking for shade then it actually took me to do the work. Since I carry a spare fuel pump I just swapped it out and was back on the road again. After taking a lunch break, and stopping at Autozone to get a new spare (made in china part), I was on my way again.
I think I purchased my spare Airtex unit at Advance Auto. Unfortunately I don't have my receipt (this is why I prefer Autozone) so it might be difficult to get it replaced. I bought the Adance Auto pump less than a year ago, installed it in the car, and kept the original as spare. I'm going to go to the store I bought it from and see if they will honor the warranty without a receipt.
Even if I didn't have a spare fuel pump with me the day still wouldn't have been too bad. I could have stopped at any auto parts store and gotten a fuel pump capable of filling my carburetor bowl. If I had been depending on a K-Jet fuel system I would be stranded in Jackson until a vendor could overnight me a part.
Last edited by stevedmc; 08-14-2011 at 04:42 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules