FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 10 of 1102

Thread: Farrar's car blog

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Owner since 2007 Farrar's Avatar
    Join Date:  May 2011

    Location:  Fort Lauderdale

    Posts:    4,740

    My VIN:    02613

    Club(s):   (DCF)

    ... several minutes later ...

    McMaster order placed:

    - Black #6 sheet metal screws and finishing washers to replace all of the oddball, "make it fit" ones in the interior of the car.

    - Stainless M8 lock-nuts to replace the rusted original lock-nuts under the seats.

    - Nylon M8 washers for the lock-nuts above.

    - ΒΌ"-20 jack-nuts, enough to replace all of the ones in my rear fascia (installation tool included).

    - Stainless hardware for the license plate surround and taillight lenses.

    - New large washers for the seats.

    - New M10x1.5 body bolts and captive nuts for the engine compartment.

    Time for a ham sandwich and glass of lemonade.
    Last edited by Farrar; 03-04-2012 at 10:09 PM.
    3.0L, automatic, carbureted

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •