Quote Originally Posted by stevedmc View Post
You can only adjust the idle mixture screws when the car is at operating temperature and the choke plate is fully open. I've found the best thing to do is go for a brief drive (about 10 minutes) to get the car warmed up. Then pull over in a parking lot somewhere (secluded of course) and start doing your adjustments.

Basically you should only adjust the fast idle screw when the car is cold and you should only adjust the idle mixture screws when the car is hot. I've found parking lots to be the best place for doing both of these things.
I will really need to learn how to tolerate very high temperatures, if the adjustment has to be made hot. I always end up burning my knuckles on the thermostat housing.